China Double Color Injection Molding Machine,Double Color Injection Molding Machine Manufacturer
Injection Mold
(21)
Blow Mould
(2)
Crate Mould
(2)
Electric Product
(11)
Houseware Mould
(17)
Pallet Mould
(3)
Pipe Fitting Mould
(12)
Auto Parts Mould
(15)
Thin Wall Mould
(1)
| Name of item | UNIT | A | B | C | |
| Screw Diameter | Mm | 45 | 50 | 55 | |
| Screw L/D Ratio | L/D | 22.2 | 20 | 18.2 | |
| Shot volume | Cm3 | 345 | 432 | 525 | |
| Shot weight(ps) | G | 320 | 400 | 487 | |
| Oz | 11.3 | 14.1 | 17.2 | ||
| Rate of injection(ps) | g/s | 120 | 148 | 180 | |
| Plasticizing Capacity(ps) | g/s | 20 | 24 | 28 | |
| Injection pressure | Mpa | 216 | 175 | 144 | |
| Screw Speed Range | Rpm | 3-200 | |||
| Mould Clamping Force | KN | 1800 | |||
| Opening Stroke | Mm | 440 | |||
| Space Between tie Bars | Mm | 480*460 | |||
| Max.Mould Thickness | Mm | 500 | |||
| Min.mould Thickness | mm | 210 | |||
| Ejector Stroke | Mm | 100 | |||
| Ejector Force | KN | 53 | |||
| Ejector point | PC | 5 | |||
| Max pump pressure | Mpa | 16 | |||
| Motor Power | KW | 18.5 | |||
| Heating Power | KW | 8.2 | |||
| Machine size(LXWXH) | m | 5.0X1.5X1.96 | |||
| Machine weight | T | 6 | |||
| Component | |
| Oil Pump | Yuken(Japan) |
| Proportional Valve | Yuken(Japan) |
| Electromagnetic Valve | Yuken(Japan) |
| Plasticizing Oil Motor | Intermot(italy) |
| Adjusting Oil Motor | Eaton(Taiwan) |
| Airproof fitting | Vaqua(Japan) |
| Computer | Techmation(Taiwan) |
| Linear Potentiometer | Panasonic(Japan) |
| Pressure Watch | Skon(Taiwan) |
| Overall Switch | OMRON(Japan) |
| Limit Switch | OMRON(Japan) |
| Relay | OMRON(Japan) |
| Nozzles 2pcs | Toolbox: 1set | Heating Ring:3pcs | Block: 1sets | Grease:1 barrel |
| Filter: 1pc | Limit Switch: 2pcs | Hexagon Wrench:1sets | Thermocouple:3pcs | Seal Ring: 3pcs |
