Specification Of TX-288
Machine Detail:
The compnent for the Machine:
1.machine and price
2.Spare Parts
3. Guarantee term We can guarantee all machine is new, and guarantee 12 months from the date the machine is arrived you factory except that:
a. Easy broken parts like fuse, heater is not included
b. the screw and barrel is 6 months.
4. Payment term: The payment term is 30% down payment and 70% before delivery.
5. Delivery time:
Delivery time is 25 days after receive your downpayment, due to delay by payment we will extend the delivery time according the delaying date. If we have machine in the producing the delivery will be more fast.
Additionally the quote’s expiry time is 30 days.
Machine Detail:
| Name of item | UNIT | A | |||
| Screw Diameter | Mm | 65 | |||
| Screw L/D Ratio | L/D | 18.4 | |||
| Shot volume | Cm3 | 896 | |||
| Shot weight(ps) | G | 815 | |||
| Oz | 28 | ||||
| Rate of injection(ps) | g/s | 285 | |||
| Plasticizing Capacity(ps) | g/s | 56 | |||
| Injection pressure | Mpa | 167 | |||
| Screw Speed Range | Rpm | 3-200 | |||
| Mould Clamping Force | KN | 2880 | |||
| Opening Stroke | Mm | 555 | |||
| Space Between tie Bars | Mm | 580*560 | |||
| Max.Mould Thickness | Mm | 630 | |||
| Min.mould Thickness | mm | 230 | |||
| Ejector Stroke | Mm | 170 | |||
| Ejector Force | KN | 70 | |||
| Ejector point | PC | 9 | |||
| Max pump pressure | Mpa | 16 | |||
| Motor Power | KW | 30 | |||
| Heating Power | KW | 15 | |||
| Machine size(LXWXH) | m | 5.6*1.6*2.2 | |||
| Machine weight | T | 9.2 | |||
The compnent for the Machine:
| Component | |
| Oil Pump | Yuken(Japan) |
| Proportional Valve | Yuken(Japan) |
| Electromagnetic Valve | Yuken(Japan) |
| Plasticizing Oil Motor | Intermot(italy) |
| Adjusting Oil Motor | Eaton(Taiwan) |
| Airproof fitting | Vaqua(Japan) |
| Computer | Techmation(Taiwan) |
| Linear Potentiometer | Panasonic(Japan) |
| Pressure Watch | Skon(Taiwan) |
| Overall Switch | OMRON(Japan) |
| Limit Switch | OMRON(Japan) |
| Relay | OMRON(Japan) |
1.machine and price
| NO. | Item | Description | Quantity | Price |
| 1 | Plastic injection mould machie | 1set | ||
| 2 | ||||
| Total(amount) |
2.Spare Parts
| Nozzles 2pcs | Toolbox: 1set | Heating Ring:3pcs | Block: 1sets | Grease:1 barrel |
| Filter: 1pc | Limit Switch: 2pcs | Hexagon Wrench:1sets | Thermocouple:3pcs | Seal Ring: 3pcs |
3. Guarantee term We can guarantee all machine is new, and guarantee 12 months from the date the machine is arrived you factory except that:
a. Easy broken parts like fuse, heater is not included
b. the screw and barrel is 6 months.
4. Payment term: The payment term is 30% down payment and 70% before delivery.
5. Delivery time:
Delivery time is 25 days after receive your downpayment, due to delay by payment we will extend the delivery time according the delaying date. If we have machine in the producing the delivery will be more fast.
Additionally the quote’s expiry time is 30 days.
- Product Images: Thermoset Injection Molding Machine
